LABORATORY TESTING THE COMBINED ELONGATE STRUCTURAL ELEMENTS OF SUPPORT OF A MINE OPENING

Authors

DOI:

https://doi.org/10.31649/2311-1429-2021-1-20-27

Keywords:

testing, steel and concrete composite structure, combined structure, stress-strain state, frame, mine opening

Abstract

The stress-strain state of test specimens of the new combined structure of support of a mine opening under loads is studied. The test specimens are compound modular elements of the designed earlier combined structure of support. Every single modular element is the triangular prism, consisting of a reinforced concrete slab and a steel grid made of tube web members. The slab and web members are grouped in a complete element while concreting the slab. The tension sensor’s method of experimental investigation is applied to the testing specimens. Tests of specimens are carried out under the load forced with cargoes. Loads are set in the ways that to simulate service conditions, counting the most adverse. Design features of the support and test specimens are shown. Particulars of the support and its elements, production technology, assemblies as well as the sizes are briefly described. The methodology of testing specimens, as well as the analysis of the outcomes, are presente.

Author Biographies

Grygorii Gasii, Sumy National Agrarian University

Doctor of Engineering Sciences, Associate Professor, Head of Department of Construction Technology

Olena Hasii, Poltava University of Economics and Trade

PhD, Associate Professor, Associate Professor of the Department of Finance and Banking

References

Barla G., Barla M. Innovative tunnelling construction methods in squeezing rock // What future for the infrastructure, Pàtron Editore Bologna, 2008, pp. 103-119.

Kaiser P.K., Cai M. Design of rock support system under rockburst condition // Journal of Rock Mechanics and Geotechnical Engineering, 2012, 4(3), pp. 215-227.

Uyar G.G., Aksoy C.O. New support suggestions to high swelling clayey rock mass // Journal of Mining Science, 2018, 54(4), pp. 617-627. https://doi.org/10.1134/S1062739118044087

Wang M., Zheng D., Niu S., Li W. Large deformation of tunnels in longwall coal mines // Environmental earth sciences, 2019, 78(2), 45. https://doi.org/10.1007/s12665-019-8044-3

Bulat A.F. Advanced technologies for tunnel supporting in Ukrainian coal mines // Visnyk of the National Academy of Sciences of Ukraine, 2014, (1), pp. 74-79. https://doi.org/10.15407/visn2014.01.074

Elrawy W.R., Abdelhaffez G.S., Saleem H.A. Stability assessment of underground openings using different rock support systems // Rudarsko-geološko-naftni zbornik, 2020, 35(1), pp. 49-64.

Gharavi M., Shafiezadeh N. A Comparison of underground opening support design methods in jointed rock mass // International Journal of Engineering, Transactions B: Applications, 2008, 21 (3), pp. 235-248.

Storchak G.G, Korol A.Yu, Gapieiev S.M. The issue of increasing the stability of discontinuous workings with metal support under the conditions of irregular loading // Up-to-date resource- and energy-saving technologies in mining industry, 2013, 11(1), pp. 143-152.

Khalimendik O.V, Storchak G.G, Khalimendik O.V, Pustoviy V.V. Ways of maintenance prolonged sustainability of long mine workings in conditions unbalanced loads when using metal support spaceframe // Up-to-date resource- and energy- saving technologies in mining industry, 2013, 12(2), pp. 157-165.

Lu Y., Ke W., Huang X., Xiao M., Huang J., Chen J. Comparative analysis of different construction methods for mine tunnels // In IOP Conference Series: Materials Science and Engineering, 2019, 780(4), 042032. https://doi.org/10.1088/1757-899X/780/4/042032

Stables B., Mirabile B. An improved load measuring device for underground mining standing supports // In Proceedings of the 38th International Conference on Ground Control in Mining, 2019, p. 364. Society for Mining, Metallurgy & Exploration.

Aksenov V.V., Kazantsev A.A., Dortman A.A. Obzor suschestvuyuschih tipov krepi gornyih vyrabotok i analiz ih vozmozhnosti primeneniya v geovinchesternoy tehnologii // Gornyiy informatsionno-analiticheskiy byulleten (nauchno-tehnicheskiy zhurnal), 2012, 3, pp. 130-137.

Karhapolov Yu.V., Lohunova A.O. Analyz tekushcheho sostoianyia protiazhennykh hornykh vyrabotok uholnykh shakht HP Selydovuhol // Visnyk Kryvorizkoho Natsionalnoho Universytetu, 2015, 39, pp. 97-101.

Rahimi B., Sharifzadeh M., Feng X.T. Ground behaviour analysis, support system design and construction strategies in deep hard rock mining–Justified in Western Australian's mines // Journal of Rock Mechanics and Geotechnical Engineering, 2020, 12(1), pp. 1-20. https://doi.org/10.1016/j.jrmge.2019.01.006

Tereschuk R.N., Grigoriev A.Ye. Examining the state of excavations in the mines of Ltd "Dobropolyeugol" // Zbirnyk Naukovykh Prats DonNTU, 2014, 1, pp. 68-85.

Wieja T. Influence of spatial form of underground galleries on geometry and structural design of old mine support constructions // Biuletyn of Polish Society for Geometry and Engineering Graphics, 2017, 30, pp. 63-72.

Gasii G.M. Technological and design features of flat- rod elements with usage of composite reinforced concrete // Metallurgical and Mining Industry, 2014, 6(4), pp. 23-25.

Storozhenko L.I., Gasii G.M. Experimental research of strain-stress state of ferrocement slabs of composite reinforced concrete structure elements // Metallurgical and Mining Industry, 2014, 6(6), pp. 40-42.

Storozhenko L.I., Hasii H.M. The new composite designs for mine tunnel support // Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 2015, (4), pp. 28-34.

Gasii G., Hasii O., Zabolotskyi O. Estimate of technical and economic benefits of a new space composite structure // In MATEC Web of Conferences, 2017, 116, 02014. https://doi.org/10.1051/matecconf/201711602014

Gasii G., Hasii O., Klimenko V. Testing of the combined structural elements of support of a mine opening // In E3S Web of Conferences, 2020, 168, 00028. EDP Sciences. https://doi.org/10.1051/e3sconf/202016800028

Gasii G.M. Production of full-scale experimental modular specimens of the steel and concrete composite cable space frame // Inżynieria Bezpieczeństwa Obiektów Antropogenicznych, 2017, 3, pp. 13-17.

DBN V.2.6-98:2009. Konstruktsii budynkiv i sporud. betonni ta zalizobetonni konstruktsii. Osnovni polozhennia (Minrehion Ukrainy, 2011).

DBN V.2.6-198:2014. Steel structures. Design code (Minrehion Ukrainy, 2014).

DBN V.2.6-160:2010. Konstruktsii budynkiv i sporud. stalezalizobetonni konstruktsii. Osnovni polozhennia (Minrehion Ukrainy, 2010).

Shmukler V.S., Krasnov S.N. The use of modular elements in the construction of pedestrian bridges // Naukovi Visti Dalivskoho Universytetu, 2017, 12.

Chen W.F., Lui E.M. Handbook of structural engineering. CRC press, 2005.

Hasii H.M. Prostorovi Strukturno-Vantovi Stalezalizobetonni Konstruktsii Monohrafiia. Poltava: ASMI, 2018.

Hasii H.M. Rekomendatsii Do Proektuvannia Prostorovykh Strukturno-Vantovykh Stalezalizobetonnykh Konstruktsii. Poltava: ASMI, 2018.

Downloads

Abstract views: 0

Published

2021-12-29

How to Cite

[1]
G. Gasii and O. Hasii, “LABORATORY TESTING THE COMBINED ELONGATE STRUCTURAL ELEMENTS OF SUPPORT OF A MINE OPENING”, СучТехнБудів, vol. 30, no. 1, pp. 20–27, Dec. 2021.

Issue

Section

BUILDING CONSTRUCTION

Metrics

Downloads

Download data is not yet available.