THE METHODOLOGY OF THE ENERGY AUDIT OF ENTERPRISES BY THE THERMAL IMAGING METHOD IN ROAD INDUSTRY

Authors

  • Nikolai Dmitriev National Transport University
  • Igor Hamelyak National Transport University
  • Ivan Popelysh National Transport University
  • Ivan Kotz Vinnitsia National Technical University

Keywords:

energy consumption, energy efficiency, energy audit, thermal energy, thermal imaging method of examination, bituminous concrete plants, heat flow, temperature of the surface, thermal chart, insulation

Abstract

One of substantial constituents of reduction of prime price of making of bituminous concrete mixture is application of energy-saving technologies at her making. It is set that middle energy consumption on bituminous concrete plants are approximately 0,40 GJ/t. Such considerable energy consumption depend on the imperfect heating system of technological equipment that assumes the severe losses of thermal energy during realization of technological process. In addition, it is set that the increase of the energy efficiency technological process can be attained due to reduction of initial humidity of making ingredients of bituminous concrete mixture. Application of thermal imaging method is offered for realization of energy audit and establishment of the real picture of current situation with an energy consumption on an enterprise, that allows to educe priority directions for further work on an energy-savings.

Author Biographies

Nikolai Dmitriev, National Transport University

Doctor of Engineering, professor, vice-rector

Igor Hamelyak, National Transport University

PhD, Professor, Department of Airports

Ivan Popelysh, National Transport University

Ph.D., associate professor, assistant professor of airports

Ivan Kotz, Vinnitsia National Technical University

Ph.D., Professor of Heat

References

1. ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
2. (Настанови щодо використання статистичних процедур в стандарті ISO 9001:2000). – Режим доступу: http://www.iso.org/iso/catalogue_detail?сsnumber =36674
3. ISO/TR 13425:2003 Guidelines for the selection of statistical method
4. sinstandardization and specification (Рекомендації щодо вибору статистичних методів в стандартизації та технічних вимогах (специфікації)). – Режим доступу: http://www.iso.org/iso/home/store/catalogue_ics/catalogue_detail_ics.htm?csnumber=38715
5. Методика проведення енергетичного аудиту закладів освіти. Загальні положення. Порядок проведення / НТУУ “КПІ” Інститут енергозбереження та енергоменеджменту. – К., 2009. – 75 с.
6. ДСТУ Б В.2.2-21-2008 «Метод визначення питомих тепловитрат на опалення будинків». К., 2008. – 84 с.
7. М 02070915-737:2014 «Методика з проведення енергетичного аудиту бітумних баз та асфальтобетонних заводів з використанням тепловізійного обладнання». – К., 2014. – 75 с.

Downloads

Abstract views: 15

Published

2015-06-25

How to Cite

[1]
N. Dmitriev, I. Hamelyak, I. Popelysh, and . I. Kotz, “THE METHODOLOGY OF THE ENERGY AUDIT OF ENTERPRISES BY THE THERMAL IMAGING METHOD IN ROAD INDUSTRY”, СучТехнБудів, vol. 18, no. 1, pp. 137–144, Jun. 2015.

Issue

Vol. 18 No. 1 (2015)

Section

ENERGY EFFICIENCY IN CONSTRUCTION

Metrics

Downloads

Download data is not yet available.

License

Copyright (c) 2015 Nikolai Dmitriev, Igor Hamelyak, Ivan Popelysh, Ivan Kotz

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.